Hamamatsu R6095 Photomultiplier Socket / Housing Scintillation Detector PMT

Description

Detector housing / Socket / Driver Board for Hamamatsu R6095 PMT.
Includes Heavy Duty Aluminum Machined Housing, Spring Loaded Cap,  14 Pin PMT Socket / Printed Circuit Board, and Leads with Molex KK series 8 Contact Female Header with part number label on the cable 425530-003.
Housing approximately 7-1/2" long x 1-1/2" diameter with Male Threads on the PMT end.
Board is marked SAIC (manufacturer?) appears to be the biasing network and signal conditioning for the PMT? -unverified information.
Some connections on the PCB are labeled: + & - 5V, Sig, HV and PG1, PG2.   Board has  a jumper labeled Med/Low.
Unknown application but a great start to build a Gamma Scintillation Detector.
PMT Socket appears to be held in with some RTV Silicone Sealant.
Used the R6095 that was in it as a replacement for another project.  PMT is NOT included.
No apparent damage of any kind noted.
Untested offered for parts or repair only -no returns.